Frequently Asked Questions

Rendering with vray and a manual seed
Last Updated 2 years ago

If you are manually setting the seed in Vray using the vray.dmcs_randomSeed setting make sure to leave enough range between seed 1 and seed 2 for the two buffers.

Vray will render to the max samples required adjusting the seed to be +1 until max.

So if you have a max of 128 and a first seed of 10, at minimum you would need to set the second seed to 139 to avoid an over run of the index.

The better option is to use a large range that cannot be encompassed by your max IE 0 and 50000.

Please Wait!

Please wait... it will take a second!